Keeping your Dyson vacuum filter clean is essential to maintaining optimal performance and ensuring your vacuum continues to function efficiently. Over time, dust, dirt, and debris accumulate in the filter, causing a decline in suction power and air quality.
Regular maintenance of the filter not only prolongs the life of your vacuum but also enhances its ability to capture allergens and dust particles effectively. In this guide, we’ll walk you through the simple steps to properly clean your Dyson vacuum filter, so you can keep your machine running smoothly and your home free of pollutants.
5 easy Step to Clean a Dyson Vacuum Filter
Learn how to clean a Dyson vacuum filter to maintain peak performance and prolong the life of your vacuum. Follow these simple steps to ensure your vacuum continues to work efficiently while keeping your home free of dust and allergens.
Step 1: Remove the Filter
First, unplug the Dyson vacuum to ensure safety. Find the filter inside the vacuum cleaner. Most Dyson models have the filter at the top or near the bottom of the machine, depending on the type (upright, cordless, or canister).
On cordless models, the filter can be found by unscrewing the top part.
On upright models, it’s often in the ball section or near the cyclone.
How to remove vacuum filter : Gently twist or pull out the filter. Be careful not to use too much force.
Step 2: Remove Excess Dust
Before rinsing, tap the filter lightly on the side of a trash bin or outdoor area to remove any loose dust. This helps prevent clogging when you rinse it with water.
Shake it a little, but don’t bang it too hard to avoid damaging the filter material.
Step 3: Rinse the Filter Under Cold Running Water
Hold the filter under cold running water from your sink. It’s important to avoid using any cleaning products like soap or detergent because they can damage the filter.
Rotate the filter as you rinse to ensure all sides are cleaned.
Keep rinsing until the water runs clear, which means the dirt has been washed away.
Step 4: Squeeze the Water Out
After rinsing, gently press the filter with both hands to remove as much water as you can. Be gentle to avoid tearing or damaging the filter’s surface.
Don’t twist or wring the filter harshly. Just press to get rid of excess water.
Step 5: Let it Air Dry for 24 Hours
Place the filter in a warm, dry area (but not in direct sunlight). Let it dry for at least 24 hours.
Make sure it’s completely dry before putting it back into your vacuum, as a wet filter could damage the vacuum or cause mold to grow.
Pro Tip: Leave the filter near a window or fan to speed up the drying process. Do not use a hairdryer or any other heat source.
